Hobby-Lobby
SERENITY 1-METER SAILBOAT RTR (OVERSIZE)
Pro Boats Serenity 1 Meter Sailboat RTR Pro Boat's Serenity ..." />
| Needed to complete | SPM9526 Spektrum 150mA wall charger, (4) AA Batteries (sold separately) Technical Specifications |
| Beam | 7.5 inches |
| Mast Height | 51.5 inches |
| Radio | Spektrum 2.4GHz 2-Stick Transmitter (DX2M)/Spektrum MR200 |
| Hull Material | Fiberglass |
| Sail Material | Rip-stop nylon |
| Sail Area (Main) | 342 sq in |
| Sail Area (Jib) | 179 sq in |
| Sail Area (Overall) | 521.5 sq in |
| Needed to complete | SPM9526 Spektrum 150mA wall charger, (4) AA Batteries (sold separately) |
,
Pro Boats Serenity 1 Meter Sailboat RTR Pro Boat's Serenity ...Hobby-Lobby
MISS GEICO 29 BL CAT 2.4 RTR
Pro Boat's fully-licenced scale replica of the full-scale Miss Geico ..." />
| Needed to complete | Two 7.2V sub-C batteries or Two 7.4V 20C+ LiPo batteries Technical Specifications |
| Beam | 11 in. (279mm) |
| Hull Material | Fiberglass Composite |
| Hull Type | Catamaran |
| Speed Control | 45A water-cooled programmable |
| Battery | 2-7.2V NiMH sub-C or 7.4 LiPo+20C (not included) |
| Kit/RTR | RTR |
| Drive System | Flexshaft/direct |
,
Pro Boat's fully-licenced scale replica of the full-scale Miss Geico ...Hobby-Lobby
TAMIYA/DEANS ULTRA CHARGE ADAPTOR
Pro Boat Tamiya / ..." />
,
Tamiya / Deans Charge Adapter by Pro Boat Tamiya / ...Hobby-Lobby
WESTWARD 18 SAILBOAT RTR
Pro Boat Westward 18-inch sailboat ..." />
| Needed To Complete | 8 AA batteries |
Key Features:, Comes ready-to-run-insert batteries and sail,
Westward 18 Sailboat RTR The Pro Boat Westward 18-inch sailboat ...Hobby-Lobby
MISS GEICO 29 BL CAT 2.4 RTR V2
| Needed To Complete | (4) AA batteries |
Key Features:, Capable of reaching speeds of 50+mph,
Miss GEICO 29 BL Cat 2.4 RTR V2 Powered by ...Hobby-Lobby
JR DSM DOUBLE PRO TRANSMITTER CASE
| Length | 14.25 in |
| Width | 9 in |
| Height | 11 in |
JR DSM Double Pro Transmitter Case Features:, Designed to hold two transmitters, Technical Specifications:, JR DSM Double Pro Transmitter Case Specs:,
JR DSM Double Pro Transmitter Case New double transmitter case ...Hobby-Lobby
DX3R PRO 3-CHANNEL RACING SYSTEM
| Built-In Telemetry | Check temp, speed and voltage in real time.* |
| Four programmable timers | Up, Down, Integrated and Rolling Lap |
| Modulation | DSM/DSM2/Marine |
| Band | 2.4GHz |
| Receiver | SR3100 |
DX3R PRO 3-Channel Racing System Highlights:, 50-model memory, Technical Specifications:, DX3R PRO 3-Channel Racing System Specs:, Number of Channels, Model Memory:50, Transmitter (Tx) Battery Type:AA,
The DX3R PRO is packed with first-class software High-End Software. ...Hobby-Lobby
CASTLE BEC PRO V2
| Length | 1.69 in (43mm) |
| Width | 1.3 in (33mm) |
| Height | .94 in (24mm) |
| Weight | 1 oz (29 grams) without wires |
Castle BEC PRO V2 Highlights:, Rated for up to 12S input (50.4 volts),
A high-output switching BEC The Castle PRO BEC is intended ...Hobby-Lobby
30 AMP PRO SWITCH-MODE BEC BRUSHLESS ESC
| Brake | Yes |
| Continuous Maximum Current | 30A |
| Momentary Peak Current | 35A |
| Length | 2.0 in (51mm) |
| Width | 1.1 in (28mm) |
| Height | 0.35 in (8.7mm) |
| Weight | 1.1 oz (31g) |
30 Amp Pro Switch Mode BEC Brushless ESC Highlights:, Up to 30-amp continuous current with proper airflow, 35-amp peak, Technical Specifications:, 30 Amp Pro Switch Mode BEC Brushless ESC Specs:, Input Voltage:, 3S 4S Li-Po, 9- to 12-cell Ni-MH/Ni-Cd input voltage, Input Connector Types:, 16AWG with E-flite EC3 connector, Output Connector Types:, 16AWG with 3.5mm Female Gold Bullet Connectors, BEC Voltage:, 5.5V Switch-mode, 700mA continuous,
30 Amp Pro Switch-Mode BEC Brushless ESC E-flite's 30 amp ...Hobby-Lobby
10 AMP PRO BRUSHLESS ESC
| Brake | Yes - Programmable |
| Continuous Maximum Current | 10A |
| Momentary Peak Current | 12A (15 sec) |
| Length | 1.2 in (30mm) |
| Width | 0.7 in (17.5mm) |
| Height | 0.4 in (10mm) |
| Weight | 0.35 oz (10g) |
10 Amp Pro Brushless ESC Highlights:, Up to 10-amp continuous current with proper air flow, Technical Specifications:, 10 Amp Pro Brushless ESC Specs:, Input Connector Types:, 20AWG with JST connector, Output Connector Types:, 20AWG with 2mm Female Gold Bullet Connectors, Cells w/BEC:, 2-3S Li-Po or 6-10 Ni-MH/Ni-Cd,
10 Amp Pro Brushless ESC with advanced programming and BEC ...Hobby-Lobby
40-AMP LITE PRO SWITCH-MODE BEC BRUSHLESS ESC
| Brake | Yes |
| Continuous Maximum Current | 40A |
| Momentary Peak Current | 55A |
| Length | 2.6 in (66mm) |
| Width | 1.2 in (31mm) |
| Height | 0.47 in (12mm) |
| Weight | 1.7 oz (48g) |
| BEC Voltage | 2.5A continuous |
40-Amp Lite Pro Switch-Mode BEC Brushless ESC Highlights:, Up to 40-amp continuous current with proper airflow, 55-amp burst current, Technical Specifications:, 40-Amp Lite Pro Switch-Mode BEC Brushless ESC Specs:, Input Voltage:, 3S-6S LiPo or 9- to 18-cell Ni-MH/Ni-Cd, Input Connector Types:, 13AWG with E-flite EC3 connector, Output Connector Types:, 16AWG with 3.5mm Female Gold Bullet Connectors,
The 40-Amp Lite Pro SB Brushless ESC with Switch-Mode BEC, ...Hobby-Lobby
40 AMP PRO SB BRUSHLESS ESC
| Brake | Yes - Programmable |
| Input Voltage | 10.8V - 22.2V |
| Momentary Peak Current | 55A (15 sec) |
| Length | 2.70 in (68.6mm) |
| Width | 1.30 in (33.0mm) |
| Height | 0.50 in (12.7mm) |
| Weight | 2.2 oz (62g) |
| Wire Gauge | 13AWG |
40 Amp Pro Switch Mode BEC Brushless ESC Highlights:, Up to 40-amp continuous current with proper air flow, with 55-amp burst current (15 seconds), Technical Specifications:, 40 Amp Pro Switch Mode BEC Brushless ESC Specs:, Continuous Maximum Current:, 40A with reasonable cooling, Input Connector Types:, 13AWG with E-flite EC3 Connector, Output Connector Types:, 13AWG with 3.5mm Female Gold Bullet Connectors,
Allows you to operate up to 7 analog or 6 ...Hobby-Lobby
60A PRO SWITCH-MODE BEC BRUSHLESS ESC
| Brake | Yes - Programmable |
| Input Voltage | 10.8V - 22.2V |
| Momentary Peak Current | 75A (15 sec) |
| Length | 3.00 in. (76mm) |
| Width | 1.30 in. (33mm) |
| Height | 0.50 in. (13mm) |
| Weight | 2.3 oz. (66g) |
| Wire Gauge | 13AWG |
60A Pro Switch-Mode BEC Brushless ESC Highlights:, Up to 60 amp continuous current with proper air flow, 75 amp peak, 60A Pro Switch-Mode BEC Brushless ESC Specs:, Continuous Maximum Current:, 60A with reasonable cooling, Input Connector Types:, 13AWG with E-flite EC3 connector, Output Connector Types:, 13AWG with 3.5mm Female Gold Bullet Connectors, Cells w/BEC:, 3-6S LiPo or 9-18 NiMH/NiCd,
Advanced programming, allows you to operate up to 7 analog ...Hobby-Lobby
B6-PRO 80 WATT BALANCE CHARGER FOR 1-6 LIPO CELLS
Balance charges 1-6 Lithium cells at up to 5A 5-5/8" x 3-3/8" x 1-3/8". Multi-use charger for 1-6 Li-Ion/LiPo/LiFe cells, 1-15 NiCd/NiMH cells, and Pb 2-20V. Includes adapters for "Deans" style plugs, JST, Rx pack, glow plug lighter, and alligator clips. Balance plugs on end of unit are JST-XH type and are compatible with many Asian battery packs. NOTE: when balance charging Lithium batteries, both the balance tap and the main power wires must be connected to the charger. B6-Pro Instruction Manual PDF B6-Pro Includes: Internal independent lithium battery balancer: Employs an individual-cell-voltage balancer to maintain your pack in balance while charging. Balance individual cells during discharge: During the discharge process, B6-Pro can monitor and balance each cell of the pack individually. An error message will sound and the process will end automatically if the voltage of any single cell is abnormal. Fast and Storage mode charging: "Fast" charge will fully charge a lipoly battery in the shortest time. "Store" setting will charge the battery at approximately a 50% charge for long term storage. This prolongs the useful life of the battery pack. Charges various types of LiPoly cells: Includes charging programs for LiFe (A123), Li-Ion, and LiPo battery types. Data store/load: Up to 5 batteries' data can be stored for easy programming. Cyclic charging/discharging: 1-5 cycles of either charge>discharge or dischage>charge is possible. B6-Pro Specs: Operating voltage range: DC 11.0~18.0 Volt Circuit power: Max. charge power 80W Charge current range: 0.1~5.0A Discharge current range: 0.1-2.0A Current drain for balancing Li-po: 300 mAh/cell NiCd/NiMH battery cell count: 1-15 cells Li-ion/Polymer cell count: 1-6 series Pb battery voltage: 2V, 20V, ,
Balance charges 1-6 Lithium cells at up to 5A 5-5/8" ...